Site Developed by Via Studios | Digital Agency |
Register  •   Log In
Your Cart (0)
Accreditation for ISO9001 & UKAS

Request a Callback

By submitting your details, you hereby agree to the Terms and Conditions.


A-35M Autometers RS 485 Modbus (v6)

  • Current Transformer Operated 5 Amp
  • 4 Modules Wide
  • Mid Aproved B and D.
  • Suitable for use with the Autometers Horizon System.
  • RS 485 Modbus (v6) with Two Pulse Outputs
A-35M 2018

Product Details

The A-35M is the latest in a range of three phase multifunction Din Rail energy meters. The new three phase 230/400 Volt, 50 Hz, 5 amp ( current transformer operated) is approved and certified by SGS, Uk ( MID appendix “B” and “D”) This new meter has been specifically designed with communication as its priority. The meter has two outputs, RS 485 Modbus communication (Autometers V6 protocol) and a pulse output. (Depending on c.t ratio will determine the imp/kwh)

The A-35M has an LCD with illuminated white numbers on a blue back ground enabling the parameters to be read a very easy. The meter has over forty parameters which can be via the display or read via the Modbus output. To read the parameters on the display it will be necessary to put your finger on the allocated keys on the front of the meter and scroll through the display.

The meter is also fitted with a red light which blinks in proportion to the measured active energy for calibration purposes (3200 imp/kwh). Popular Parameters available, kWh, kVarh, Watts ,Amps, Volts, Power, Power Factor, Frequency, Import and Export energies all available via the display or via the Modbus output.

This meter requires Current transformers, cable harness and should be fused with shorting terminals as good practice.


© 2020 Autometers Systems
Electricity Meters and Power Monitoring Systems
4b Albany Road, Chorlton-cum-Hardy, Manchester M21 0AW
Tel: +44 (0)161 861 9056 / Fax: +44 (0)161 881 3745